We started out by putting the frame of the roof up. we notched out the cross beams to hold the purlin beams. Each side was secured to the top of the walls.
 |
| Photo Credit - Renee Sosanna Olson |
Then we placed the plywood on top of the beams. The plywood was primed on both sides before adding to the roof.
We used nails and roofing cement to hold the plywood in place.
 |
| Photo Credit - Renee Sosanna Olson |
 |
| Photo Credit - Renee Sosanna Olson |
We will cover the seams with roofing tape before putting a coat of rubberized roofing material across the entire roof.
This is the look inside.
 |
| Photo Credit - Renee Sosanna Olson |
 |
| Photo Credit - Renee Sosanna Olson |
Posts
No comments
Post a Comment